User's Manual

3-22
Q370M-IM-A
iGPU Multi-Monitor
Allows you to enable the iGPU Multi-Monitor. Set this item to [Enabled] to
empower both integrated and discrete graphics. The iGPU shared system
memory size will be xed at 64MB. Conguration options: [Disabled]
[Enabled]
DVMT Pre-Allocated
Allows you to select DVMT 5.0 Pre_Allocated (Fixed) Graphics Memory size
used by the Internal Graphics Device. Conguration options: [32M] [64M]
[96M] ~ [1024M]
RC6(Render Standby)
Allows you to enable or disable render standby support. Conguration
options: [Disabled] [Auto]
PEG Port Conguration
Allows you to congure the PEG Port settings.
PCIEX16_1 Link Speed
Allows you to congure the PCIEX16_1 speed. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
3.4.4 PCH Conguration
PCI Express Conguration
PCIe Speed
Allows you to congure the PCIe speed. Conguration options: [Auto] [Gen1]
[Gen2] [Gen3]
IOAPIC 24-119 Entries
Sets to whether allow IOAPIC 24-119 Entries to expand to PIRQI-PIRQX.
Conguration options: [Disabled] [Enabled]
System Time and Alarm Source
Allows you to select source of system time and alarm functions.
Conguration options: [ACPI Time and Alarm Device] [Legacy RTC]
DeepSx Power Policies
Allows you to cogure DeepSx Mode.
Conguration options: [Disabled] [Enabled in S4-S5]
3.4.5 PCH Storage Conguration
While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Empty if no SATA device is installed to the
corresponding SATA port.