User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Start ASUS EzFlash
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 Platform Misc Configuration
- 3.3.5 CPU Configuration
- 3.3.6 System Agent (SA) Configuration
- 3.3.7 PCH Storage Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 ACPI Settings
- 3.3.10 LVDS Configuration
- 3.3.11 APM Configuration
- 3.3.12 NCT6116D Super IO Configuration
- 3.3.13 NCT6116D HW Monitor
- 3.3.14 Serial Port Console Redirection
- 3.3.15 Intel TXT Information
- 3.3.16 USB Configuration
- 3.3.17 NVMe Configuration
- 3.3.18 HDD Secure Erase
- 3.3.19 Dynamic Digital IO
- 3.3.20 Network Stack Configuration
- 3.4 Security menu
- 3.5 Boot menu
- 3.6 Save & Exit menu
- 3.7 Event Logs
- BIOS setup
- Appendix
1-3
Chapter 1: General information
Front panel I/O
ports
1 x Chassis intrusion header
1 x Front panel audio connector(AAFP)
1 x System panel connector
1 x Clear CMOS header
1 x Speaker connector
1 x LPC Debug header
1 x S/PDIF connector
1 x I
2
C header
1 x AT/ATX mode selection header
1 x 24-pin ATX power connector
1 x 4-pin ATX power connector
1 x SPI TPM header
1 x M.2 socket 1 (Key E, 2230) for WiFi/BT device supports PCIE
and CNVI WiFi module
1 x M.2 socket 3 (Key M, 2260/2280) with PCIe and SATA modes
4 x SATA 6.0Gb/s connectors
1 x WDT_EN header
1 x eDP port
1 x LVDS header
1 x Flat panel display brightness connector
1 x Display panel VCC power selection header
1 x Display panel backlight power selection header
1 x Back Light power enable selection header
GPIO
1 x 8-bit GPIO header
Manageability WfM 2.0, DMI 2.0, WOL by PME
Watch dog timer Yes
Power
requirement
AT/ATX mode
DC in 12V
Operation
Temperature
0~60°C
Non-Operation
Temperature
-40~85°C
Relative Humidity 0%~85%
OS support
Windows
®
10 (64-bit)
Windows
®
10 IoE Enterprise
Ubuntu
(continued on the next page)