User Manual

3-9
Chapter 3: BIOS setup
Hyper M.2X16
This item allows you to detect the SSD intalled onto the Hyper M.2 X16 card.
[Enabled] Two or three SSDs installed onto the Hyper M.2 X16 card can be detected.
[Disabled] Only one SSD installed onto the Hyper M.2 X16 card can be detected.
The number of the SSDs that can be detected varies depending on the
congurations of the PCIe X16 slots.
I2C1 Controller
This item allows you to enable or disable the Serial IO Controller. Conguration options:
[Enabled] [Disabled]
3.3.9 ACPI Settings
EnbaleACPIAutoConguration
This item allows you to enable or disable BIOS ACPI auto conguration.
Conguration options: [Enabled] [Disabled]
Enbale Hibernation
This item allows you to enable or disable the system’s Hibernation (OS/S4 Sleep
State). Conguration options: [Enabled] [Disabled]
This option may not be available on some operating systems.
ACPI Sleep State
Allows you to select the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed. Conguration options: [Suspend Disabled] [S3
(Suspend to RAM)]
Lock Legacy Resources
Allows you to enable or disable Lock of Legacy Resources. Conguration options:
[Enabled] [Disabled]
3.3.10 LVDSConguration
LVDS Support
Conguration options: [Disable] [Enabled]
The following item appears when you set LVDS Support to [Enabled].
All-in-One Chassis
Allows you to select All-in-One (AiO) Chassis (if applicable) for simplied AiO
conguration. Conguration options: [None] [1920*1080 LVDS1] [1920*1080
LVDS2] [1920*1080 LVDS3] [1600*900 LVDS4]
• Be cautious when selecting AiO chassis. Incorrect selection of AiO chassis
can cause incorrect operation or potential damage to AiO chassis hardware.
• The following items appear only when you set All-in-One Chassis to [None].