User's Manual

3-20
Q370I-IM-A R2.0
USB Support
[Disabled] All USB devices will NOT be available until after OS boot.
[Full Initial] All USB devices will be available in OS and POST.
[Partial Initial] USB Mass Storage and specic USB port/device will NOT be available
before OS boot.
Network Stack Driver Support
[Disabled] Network Stack Driver will be skipped.
[Enabled] Network Stack Driver will not be skipped.
Redirection Support
Allows you to enable or disable the Redirection function.
Conguration options: [Disabled] [Enabled]
Setup Prompt Timeout
Allows you to set the number of seconds to wait for setup activation key.
65535(0xFFFF) means indenite waiting.
Conguration options: [1] - [65535]
Boot up NumLock State
[On] Set the power-on state of the NumLock to [On].
[Off] Set the power-on state of the NumLock to [Off].
Chassis Intrusion Detection
Allows you to enable or disable the chassis intrusion detection function.
Conguration options: [Disabled] [Enabled]
Wait For ‘F1’ If Error
When this item is set to [Enabled], the system waits for the F1 key to be pressed
when error occurs.
Conguration options: [Disabled] [Enabled]
Quiet Boot
Allows you to enable or disable the Quiet Boot option.
Conguration options: [Disabled] [Enabled]
Boot Option Priorities
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
To select the boot device during system startup, press <F8> when ASUS Logo
appears.