Specifications

4-94-9

4-9

ASUS Pundit-AE3ASUS Pundit-AE3

ASUS Pundit-AE3

Chassis intrusion connector

CHASSIS

+5VSB_MB

Chassis Signal

GND

(Default)

8.8.

GAME/MIDI port connector (16-1 pin GAME)GAME/MIDI port connector (16-1 pin GAME)

GAME/MIDI port connector (16-1 pin GAME)

This connector is for a GAME/MIDI port. Connect the USB/GAME

module cable to this connector, then install the module to a slot

opening at the back of the system chassis. The GAME/MIDI port

connects a joystick or game pad for playing games, and MIDI devices

for playing or editing audio files.

9.9.

Chassis intrusion connector (4-1 pin CHASSIS)Chassis intrusion connector (4-1 pin CHASSIS)

Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or

switch. Connect one end of the chassis intrusion sensor or switch cable

to this connector. The chassis intrusion sensor or switch sends a high-

level signal to this connector when a chassis component is removed or

replaced. The signal is then generated as a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted

with a jumper cap. Remove the jumper caps only when you intend to

use the chassis intrusion detection feature.

The GAME/MIDI module is purchased separately.

GAME1

Game connector

GAME1

+5V

J2B1

J2CX

MIDI_OUT

J2CY

J2B2

MIDI_IN

J1B1

J1CX

GND

J1CY

J1B2

+5V