Configuration Guide
Table Of Contents
- About this guide
- Intel® RAID Configuration
- 1. RAID definitions
- 2. Installing storage devices
- 3. Creating a SATA RAID set in UEFI BIOS
- 4. Creating an NVMe RAID set with onboard M.2 modules in UEFI BIOS
- 5. Creating an NVMe RAID set with expansion M.2 card in UEFI BIOS
- 6. Installing the RAID controller driver during Windows® 10 or Windows® 11 OS installation
Intel
®
RAID Configuration Guide
1-23
4. A message appears, reminding you to insert the installation media containing the
driver of the RAID controller driver. Click
Browse
to continue.
5. Locate the driver in the corresponding folder of the Support DVD or the USB flash
drive with RAID driver, then click OK to continue.
6. Select the RAID controller driver you need from the list and click Next.
7. When the system finishes loading the RAID driver, select the drive to install Windows
and click Next.
8. Setup then proceeds with the OS installation. Follow screen instructions to complete.