User’s Manual

ProArt Z690-CREATOR WIFI
2-9
Chapter 2
For 2242, 2260 length
A. (optional) Remove the M.2 rubber pad.
Follow this step only if you wish to install an M.2 to type 2242.
B. (optional) If required, remove the pre-installed removable M.2 Q-Latch
screw at the 2280 length screw hole.
C. Install the M.2 Q-Latch to the M.2 length screw hole you wish to install
your M.2 to.
D. Rotate and adjust the M.2 Q-latch so that the handle points away
from the M.2 slot.
E. Install your M.2 to the M.2 slot.
F. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.