User Manual
Table Of Contents
- 目錄
- 1 認識 BIOS 程式
- 2. BIOS 設定程式
- 3. 我的最愛(My Favorites)
- 4. 主選單(Main Menu)
- 5. Ai Tweaker 選單(Ai Tweaker menu)
- 6 進階選單(Advanced menu)
- 6.1 平台各項設定(Platform Misc Configuration)
- 6.2 處理器設定(CPU Configuration)
- 6.3 系統代理設定(System Agent Configuration)
- 6.4 PCH 設定(PCH Configuration)
- 6.5 PCH 儲存裝置設定(PCH Storage Configuration)
- 6.6 PCH-FW 設定(PCH-FW Configuration)
- 6.7 Thunderbolt(TM) 設定
- 6.8 PCI 子系統設定(PCI Subsystem Settings)
- 6.9 USB 裝置設定(USB Configuration)
- 6.10 網路協定堆疊設定(Network Stack Configuration)
- 6.11 NVMe 設定(NVMe Configuration)
- 6.12 HDD/SSD SMART 資訊
- 6.13 進階電源管理設定(APM Configuration)
- 6.14 內建裝置設定(OnBoard Devices Configuration)
- 6.15 Intel® 快速儲存技術(Intel(R) Rapid Storage Technology)
- 7. 監控選單(Monitor menu)
- 8. 啟動選單(Boot menu)
- 9. 工具菜單(Tools menu)
- 10. 離開 BIOS 程式(Exit menu)
- 11. 更新 BIOS 程式(Updating BIOS)
26
PRIME / ProArt / TUF GAMING Intel 600 系列 BIOS 使用手冊
設定值:[Auto] [0] - [255]
Round Trip Latency MC0-1 CHA-B R0-7
設定值:[Auto] [0] - [255]
Memory Training Algorithms
本選單的項目用來讓您開啟或關閉不同的記憶體訓練演算法。
Early Command Training
設定值:[Auto] [Enabled] [Disabled]
SenseAmp Offset Training
設定值:[Auto] [Enabled] [Disabled]
Early ReadMPR Timing Centering 2D
設定值:[Auto] [Enabled] [Disabled]
Read MPR Training
設定值:[Auto] [Enabled] [Disabled]
Receive Enable Training
設定值:[Auto] [Enabled] [Disabled]
Jedec Write Leveling
設定值:[Auto] [Enabled] [Disabled]
Early Write Timing Centering 2D
設定值:[Auto] [Disabled] [Enabled]
Early Read Timing Centering 2D
設定值:[Auto] [Disabled] [Enabled]
Write Timing Centering 1D
設定值:[Disabled] [Enabled]
Write Voltage Centering 1D
設定值:[Auto] [Disabled] [Enabled]
Read Timing Centering 1D
設定值:[Auto] [Disabled] [Enabled]
Read Timing Centering with JR
設定值:[Auto] [Disabled] [Enabled]
Dimm ODT Training*
設定值:[Auto] [Disabled] [Enabled]
Max RTT_WR
Allows you to cap the maximum RTT_WR in power training.
設定值:[ODT OFF] [120 Ohms]
DIMM RON Training*
設定值:[Auto] [Disabled] [Enabled]
Write Drive Strength/Equalization 2D*
設定值:[Auto] [Disabled] [Enabled]
Write Slew Rate Training*
設定值:[Auto] [Disabled] [Enabled]
Read ODT Training*
設定值:[Auto] [Disabled] [Enabled]
Comp Optimization Traning
設定值:[Auto] [Disabled] [Enabled]
Read Equalization Training*
設定值:[Auto] [Disabled] [Enabled]