User Manual
Table Of Contents
- 1.1 UEFIとは
- 1.2 UEFI BIOS Utility
- 1.3 My Favorites
- 1.4 Main
- 1.5 Ai Tweaker
- 1.6 Advanced
- 1.6.1 Platform Misc Configuration
- 1.6.2 CPU Configuration
- 1.6.3 System Agent (SA) Configuration
- 1.6.4 PCH Configuration
- 1.6.5 PCH Storage Configuration
- 1.6.6 PCH-FW Configuration
- 1.6.7 Thunderbolt(TM) Configuration
- 1.6.8 PCI Subsystem Settings
- 1.6.9 USB Configuration
- 1.6.10 Network Stack Configuration
- 1.6.11 NVMe Configuration
- 1.6.12 Onboard Devices Configuration
- 1.6.13 APM Configuration
- 1.6.14 HDD/SSD SMART Information
- 1.7 Monitor
- 1.8 Boot
- 1.9 Tool
- 1.10 Exit
- 1.11 UEFI BIOSの更新
24
PRIME/PRO/ProArt/TUF GAMING Intel 400 Series BIOSマニュアル
Read Timing Centering 2D
設 定オプション: [Enabled] [Disabled]
Command Voltage Centering
設 定オプション: [Enabled] [Disabled]
Write Voltage Centering 2D
設 定オプション: [Enabled] [Disabled]
Read Voltage Centering 2D
設 定オプション: [Auto] [Enabled] [Disabled]
Late Command Training
設 定オプション: [Auto] [Enabled] [Disabled]
Round Trip Latency
設 定オプション: [Auto] [Enabled] [Disabled]
Turn Around Timing Training
設 定オプション: [Enabled] [Disabled]
Rank Margin Tool
設 定オプション: [Auto] [Enabled] [Disabled]
Margin Check Limit
制限までのマージンをチェックし、次のブートメモリーを再訓練する必要があ
るかどうか を確 認しま す。
設 定オプション: [Disabled] [L1] [L2] [Both]
次 の 項 目 は「 Margin Check Limit」を [L2] [Both] のいずれかに設定した場合にのみ変更する
ことが で きます。
Margin Limit Check L2
L2チェックのしきい値は、L1チェックのスケールです。
設 定オプション: [1] - [300]
Memory Test
設 定オプション: [Enabled] [Disabled]
DIMM SPD Alias Test
設 定オプション: [Enabled] [Disabled]
Receive Enable Centering 1D
設 定オプション: [Enabled] [Disabled]
Retrain Margin Check
設 定オプション: [Enabled] [Disabled]
CMD Drive Strength and Tx Equalization
設 定オプション: [Auto] [Enabled] [Disabled]
CMD Slew Rate Training
設 定オプション: [Auto] [Enabled] [Disabled]