User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
68
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
DDR BUS Configuration
Processor CA drive strengths
Specifies the Processor CA drive strengths.
Configuration options: [Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0 Ohm]
Processor DQ drive strengths
Specifies the Processor DQ drive strengths.
Configuration options: [Auto] [High Impedance] [240 ohm] [120 ohm] [80 ohm]
[60 ohm] [48 ohm] [40 ohm] [34.3 ohm]
Processor ODT impedance
Specifies the Processor ODT impedance.
Configuration options: [Auto] [High Impedance] [480 ohm] [240 ohm] [160 ohm]
[120 ohm] [96 ohm] [80 ohm] [68.8 ohm] [60 ohm]
Dram DQ drive strengths
Specifies the DRAM DQ drive strengths.
Configuration options: [Auto] [48 ohm] [40 ohm] [34 ohm]
Dram ODT impedance RTT_NOM_WR
Specifies the DRAM ODT impedance RTT_NOM_WR.
Configuration options: [Auto] [RTT_OFF] [RZQ (240)] [RZQ/2 (120)] [RZQ/3
(80)] [RZQ/4 (60)] [RZQ/5 (48)] [RZQ/6 (40)] [RZQ/7 (34)]
Dram ODT impedance RTT_NOM_RD
Specifies the DRAM ODT impedance RTT_NOM_RD.
Configuration options: [Auto] [RTT_OFF] [RZQ (240)] [RZQ/2 (120)] [RZQ/3
(80)] [RZQ/4 (60)] [RZQ/5 (48)] [RZQ/6 (40)] [RZQ/7 (34)]
Dram ODT impedance RTT_WR
Specifies the DRAM ODT impedance RTT_WR.
Configuration options: [Auto] [RTT_OFF] [RZQ (240)] [RZQ/2 (120)] [RZQ/3
(80)] [RZQ/4 (60)] [RZQ/5 (48)] [RZQ/6 (40)] [RZQ/7 (34)]
Dram ODT impedance RTT_PARK
Specifies the DRAM ODT impedance RTT_PARK.
Configuration options: [Auto] [RTT_OFF] [RZQ (240)] [RZQ/2 (120)] [RZQ/3
(80)] [RZQ/4 (60)] [RZQ/5 (48)] [RZQ/6 (40)] [RZQ/7 (34)]
Dram ODT impedance DQS_RTT_PARK
Specifies the DRAM ODT impedance DQS_RTT_PARK.
Configuration options: [Auto] [RTT_OFF] [RZQ (240)] [RZQ/2 (120)] [RZQ/3
(80)] [RZQ/4 (60)] [RZQ/5 (48)] [RZQ/6 (40)] [RZQ/7 (34)]
DDR Controller Configuration
DDR Power Options
Power Down Enable
Allows you to enable or disable DDR power down mode.
Configuration options: [Disabled] [Enabled] [Auto]
Infinity Fabric Frequency and Dividers
Infinity Fabric Frequency and Dividers
Allows you to set Infinity Fabric Frequency (FCLK). Auto = FCLK = MCLK. Manual =
FCLK must be less than MCLK for best performance in most cases. Latency penalties
are incurred if FCLK and MCLK are mismatched, but sufficiently high MCLK can negate
or overcome this penalty.
Configuration options: [Auto] [100 MHz] - [2000 MHz]
UCLK DIV1 MODE
Allows you to set UCLK DIV mode.
Configuration options: [Auto] [UCLK=MEMCLK] [UCLK=MEMCLK/2]