User Manual

58
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
10G LAN Card
Allows you to enable or disable the 10G LAN card.
Configuration options: [Disabled] [Enabled]
USB power delivery in Soft Off state (S5)
Allows you to enable or disable USB power when your PC is in the S5 state.
Configuration options: [Disabled] [Enabled]
Serial Port Configuration
This submenu allows you to set parameters for Serial Port.
This item will only function if there is a serial port (COM) connector on your motherboard.
Serial Port
Allows you to enable or disable the Serial port.
Configuration options: [Enabled] [Disabled]
The following item appears only when Serial Port is set to [Enabled].
Change settings
Allows you to select an optimal setting for super IO device.
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]
PCIE Link Speed
This submenu allows you to set parameters for PCIE Link Speed.
PCIEX16_1 Link Mode
Allows you to set the link speed for PCIEX16_1 Slot.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3] [GEN 4] [GEN 5]
PCIEX16_2 Link Mode
Allows you to set the link speed for PCIEX16_2 Slot.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3] [GEN 4] [GEN 5]
M.2_1 Link Mode
Allows you to set the link speed for M.2_1 Device.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3] [GEN 4] [GEN 5]
Chipset_1 Link Mode
Allows you to set the link speed between CPU and Chipset_1.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3] [GEN 4]
M.2_2 Link Mode
Allows you to set the link speed for M.2_2 Device.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3] [GEN 4] [GEN 5]
M.2_4 Link Mode
Allows you to set the link speed for M.2_4 Device.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3] [GEN 4]