User Manual

PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
45
DRAM PDA Enumerate ID Programming Mode
Configuration options: [Auto] [Sequential PDA enumeration mode] [Legacy
PDA enumeration mode]
DDR Memory MBIST
This item allows you to configure DDR Memory MBIST.
MBIST Enable
Allows you to enable or disable Memory MBIST.
Configuration options: [Disabled] [Enabled] [Auto]
The following items appear only when
MBIST Enable is set to [Enabled].
MBIST Test Mode
Allows you to select the MBIST Test Mode - Interface Mode (Tests Single and
Multiple CS transactions and Basic Connectivity) or Data Eye Mode (Measures
Voltage vs. Timing).
Configuration options: [Interface Mode] [Data Eye Mode] [Both] [Auto]
MBIST Aggressors
Allows you to enable or disable Memory Aggressor test.
Configuration options: [Disabled] [Enabled] [Auto]
MBIST Per Bit Slave Die Reporting
Reports 2D Data Eye Results in ABL Log for each DQ, Chipselect, and
Channel.
Configuration options: [Disabled] [Enabled] [Auto]
DDR Data Eye
Pattern Select
Configuration options: [PRBS] [SSO] [Both]
Pattern Length
This token helps to determine the pattern length. The possible options
are N=3...12.
Configuration options: [3] - [9]
Aggressor Channel
This helps read the aggressors channels. If set to [Enabled], you can
read from one or more than one aggressor channel. The default is set
to [Disabled].
Configuration options: [Disabled] [1 Aggressor Channel] [3 Aggressor
Channels] [7 Aggressor Channels]
DDR Memory Features
This item allows you to configure DDR Memory Features.
Memory Context Restore
Allows you to configure the memory context restore mode. When enabled,
DRAM re-training is avoided when possible and the POST latency is
minimized.
Configuration options: [Auto] [Enabled] [Disabled]
NBIO Common Options
PCIe ARI Support
Allows you to enable or disable ARI.
Configuration options: [Disabled] [Enabled] [Auto]
PCIe ARI Enumeration
Allows you to enable or disable ARI forwarding for each downstream port.
Configuration options: [Disabled] [Enabled] [Auto]