User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 Thunderbolt™ 4 monitor connection
- 2.1.11 Wi-Fi moving antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
2-16
Chapter 2: Basic Installation
Chapter 2
2.1.10 Thunderbolt™ 4 monitor connection
DisplayPort IN
DisplayPort
2. Connect the Thunderbolt™ 4 cable to the Thunderbolt™ 4 USB Type-C
®
port (USB
Type-C
®
EC1) on the motherboard and to the Thunderbolt™ 4 USB Type-C
®
port on a
monitor.
Refer to section Rear I/O connection for
the location of the DisplayPort IN port.
Refer to the Thunderbolt™ 4 card and DisplayPort configuration section on the next
page for more details on the configurations available using the DP IN and Thunderbolt™ 4
USB Type-C
®
ports.
1. Connect the bundled ASUS DisplayPort
cable to the DisplayPort on a discrete
graphic card and to the DisplayPort IN port
on the motherboard.
• The Thunderbolt™ 4 cable is not bundled with the motherboard package. Use
the Thunderbolt™ cable that came with your Thunderbolt-enabled device when
connecting to the Thunderbolt™ 4 USB Type-C
®
port on your motherboard.
• You can connect a USB Type-C
®
to Thunderbolt™ adapter, then connect the
Thunderbolt™ cable from your Thunderbolt-enabled device to the Thunderbolt™ 4
USB Type-C
®
port on the motherboard.
• Thunderbolt™ 4 USB Type-C
®
port is backward compatible with the previous
Thunderbolt™ technology.