User’s Manual

ProArt X570-CREATOR WIFI
2-9
Chapter 2
• To install a 2260 or 2242 length M.2
For M.2_1: Type 2242, 2260 M.2
For M.2_2: Type 2242, 2260 M.2
For M.2_3: Type 2242, 2260 M.2
A. (optional) Remove the M.2 rubber pad.
Follow this step only if you wish to install an M.2 to type 2242.
B. (optional) If required, remove the pre-installed removable M.2 Q-Latch
screw at the 2280 length screw hole.
C. Install the M.2 Q-Latch to the M.2 length screw hole you wish to install
your M.2 to.
D. Rotate and adjust the M.2 Q-latch so that the handle points away
from the M.2 slot.
E. Install your M.2 to the M.2 slot.
F. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.