User’s Manual

ProArt X570-CREATOR WIFI
2-7
Chapter 2
3. Install your M.2 to your M.2 slot. The steps may differ between installing M.2 of
different lengths, please refer to the different types and their installation steps below:
• To install a 22110 length M.2
For M.2_1: Type 22110 M.2
For M.2_3: Type 22110 M.2
A. Remove the pre-installed removable M.2 Q-Latch screw at the 2280
length screw hole.
B. (optional) Install the bundled M.2 rubber pad if you are installing a
single sided M.2 storage device. DO NOT install the bundled M.2
rubber pads when installing a double-sided M.2 storage device. The
rubber pad installed by default is compatible with double sided M.2
storage devices.
C. Rotate and adjust the M.2 Q-latch so that the handle points away
from the M.2 slot.
D. Install your M.2 to the M.2 slot.
E. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
OPTIONAL