User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 Thunderbolt™ 4 monitor connection
- 2.1.11 Wi-Fi moving antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
xii
Connectors with shared bandwidth
A
B
A
C
C
Configuration 1 (Default) 2
A
PCIEX16_1 x16 x8
PCIEX16_2 - x8
Configuration 1 (Default) 2
B
PCIEX16_3 x4 -
Configuration 1 (Default) 2
C
M.2_2 - x4
PCIEX16_2 x8 x4
PCIEX16_2 slot shares bandwidth with M.2_2, which runs at PCIe 4.0/3.0 x8 by default.
When M.2_2 is enabled, PCIEX16_2 will run PCIe 4.0/3.0 x4 mode, adjust this item in
BIOS settings.