User Guide

3-12
Chapter 3: General Instruction
• USB Setup: Configures the USB Type C port setting. The USB
Setup parameter affects the output resolution only when the source is
connected to the USB Type C port. Due to the technological differences
betweenUSB2.0andUSB3.2Gen1,THEmaximumUSBdata
throughput(bandwidthandotherrelatedcharacteristics)variesand
therefore influences the maximum output resolution.
*USB3.2Gen1:Thedatatransferrateaccordingtothe3.2Gen
1pecicationinUSBTypeCportonlyhaveTwolanesforMain
Link.
*USB2.0:Thedatatransferrateaccordingtothe2.0specication
inUSBTypeCportonlyhaveFourlanesforMainLink.
• ThedatatransferratewillremainUSB3.2Gen1whenusingUSBTypeCto
Acable.
• The USB Setup setting does not affect the resolution if the source is
connectedtotheDisplayPortorHDMIport.
• Power Level: Select normal level for power on hub during power saving.
Select Deep Level for power off hub during power saving.
• OSD Setup: AdjuststheOSDTimeout,DDC/CI,andTransparencyofthe
OSD screen.
• DisplayPort Stream: Switch DP Version to 1.1,1.2 or 1.4.
• Key Lock: Disable all key functions. Pressing the down button for more
than five seconds to disable key lock function.
• Power Indicator: TurnthepowerLEDindicatoron/off.
• Information: Displays the monitor information.
• language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, , Russian, Poland, Czech, Croacia,
Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional
Chinese, Japanese, Korean, Persian, Thai, Indonesian.
• All Reset:Selects“Yes”torevertallsettingstothefactorydefaultmode.