User Guide

1-3
ASUS LCD Monitor PA148 Series
1.4 Monitor introduction
1.4.1 Using the Controls button
Use the control button on the left of the monitor to adjust the image
settings.
Menu
Close
Volume
Brightness
Input Select
Menu
Close
Volume
Brightness
Input Select
1
5
4
3
6
2
1. Power button/power indicator:
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
2. Menu button:
• EnterstheOSDmenu.
3. Close Button:
• ExittheOSDmenu.
• Press the button to active OSD when in connection to a valid source.
4. Volume Button
• Adjustthevolumelevel.
• Press the button to active OSD when in connection to a valid source.
5. Input Select Button:
• Use this hotkey to switch from HDMI, USB Type-C1 and USB Type-C2
input signal.
• Press the button to active OSD when in connection to a valid source.
6. Brightness Button:
• AdjusttheBrightnessvalue.
• Press and hold it for 5 seconds to enable/disable Keys Lock.