User Guide
Table Of Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Adjusting the mini stands
- 2.2 Attaching the stand (arm/base)
- 2.3 Detaching the stand (for VESA wall mount)
- 2.4 Installing the monitor hood
- 2.5 Installing the cable clips
- 2.6 Adjusting the monitor
- 2.7 Connecting the cables
- 2.8 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications Summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-9
ASUS PA32DC OLED Monitor
6. QuickFit Plus
Allows users to have a preview of the document or photo layout directly on
the screen without printing the test copies.
To activate this function, you need to disable the PIP/PBP mode.
QuickFit Plus
Safe Area
Center Marker
Customization
Ruler
ASUS PA32DC
60Hz3840x2160@HDMI-1Standard Mode
• Safe Area: Facilitates designers and users to organize content and layout
on one page and achieve a consistent look and feel.The selections are:
1:1, Action Safe, Title Safe, or 3 x 3.
• Center Marker: Selects the center marker type. The selections are: Type
1, Type 2, or Type 3.
• Customization: You can decide the frame size by moving the
Menu
(5-way) button up/down/left/right. You can press the
Menu (5-way)
button for longer than 3 seconds to switch the measurements between
millimeter and inch.
• Ruler: This pattern presents physical ruler on the top and left sides. You
can press the
Menu (5-way) button for longer than 3 seconds to switch
the measurements between metric and imperial.