User Manual
Table Of Contents
- 1. Présentation du BIOS
- 2. Programme de configuration du BIOS
- 3. My Favorites (Favoris)
- 4. Main Menu (Principal)
- 5. Menu Ai Tweaker
- 6. Advanced menu (Menu avancé)
- 6.1 Platform Misc Configuration (Paramètres de plateforme)
- 6.2 CPU Configuration (Configuration du processeur)
- 6.3 System Agent (SA) Configuration (Agent de configuration système)
- 6.4 PCH Configuration (Configuration PCH)
- 6.5 PCH Storage Configuration (Configuration de stockage de la puce PCH)
- 6.6 PCH-FW Configuration (Configuration PCH-FW)
- 6.7 Thunderbolt™ Configuration (Configuration Thunderbolt™)
- 6.8 Trusted Computing (Informatique de confiance)
- 6.9 PCI Subsystem Settings (Paramètres de sous-système PCI)
- 6.10 USB Configuration (Configuration USB)
- 6.11 Network Stack Configuration (Configuration de pile réseau)
- 6.12 NVMe Configuration (Configuration NVMe)
- 6.13 HDD/SSD SMART Information (Informations SMART disque dur/SSD)
- 6.12 APM Configuration (Configuration APM)
- 6.15 Onboard Devices Configuration (Configuration des périphériques embarqués)
- 6.16 Intel(R) Rapid Storage Technology (Technologie Intel® Rapid Storage)
- 7. Menu Monitor (Surveillance)
- 8. Menu Boot (Démarrage)
- 9. Menu Tool (Outils)
- 10. Menu Exit (Sortie)
- 11. Mise à jour du BIOS
30
Manuel du BIOS des séries PRIME / ProArt / TUF GAMING Intel 700
Command Voltage Centering (Centrage de la tension de commande)
Options de configuration : [Auto] [Disabled] [Enabled]
Early Command Voltage Centering (Centrage de la tension de commande précoce)
Options de configuration : [Auto] [Disabled] [Enabled]
Write Voltage Centering 2D (Centrage 2D de la tension d'écriture)
Options de configuration : [Auto] [Disabled] [Enabled]
Read Voltage Centering 2D (Centrage 2D de la tension de lecture)
Options de configuration : [Auto] [Disabled] [Enabled]
Late Command Training (Entraînement aux commandes tardives)
Options de configuration : [Disabled] [Enabled] [Auto]
Round Trip Latency (Latence aller-retour)
Options de configuration : [Auto] [Disabled] [Enabled]
Turn Around Timing Training (Entraînement du timing de retournement)
Options de configuration : [Auto] [Disabled] [Enabled]
CMD CTL CLK Slew Rate (Vitesse de balayage CMD CTL CLK)
Options de configuration : [Auto] [Disabled] [Enabled]
CMD/CTL DS & E 2D
Options de configuration : [Auto] [Disabled] [Enabled]
Read Voltage Centering 1D (Centrage 1D de la tension de lecture)
Options de configuration : [Auto] [Disabled] [Enabled]
TxDqTCO Comp Training (Entraînement TxDqTCO)
Options de configuration : [Auto] [Disabled] [Enabled]
ClkTCO Comp Training (Entraînement ClkTCO)
Options de configuration : [Auto] [Disabled] [Enabled]
TxDqsTCO Comp Training (Entraînement TxDqsTCO)
Options de configuration : [Auto] [Disabled] [Enabled]
VccDLL Bypass Training (Entraînement de contournement VccDLL)
Options de configuration : [Auto] [Disabled] [Enabled]
CMD/CTL Drive Strength Up/Dn 2D (Résistance d'attaque haute/basse 2D de CMD/CTL)
Options de configuration : [Auto] [Disabled] [Enabled]
DIMM CA ODT Training (Entraînement DIMM CA ODT)
Options de configuration : [Auto] [Disabled] [Enabled]
PanicVttDnLp Training (Entraînement PanicVttDnLp)
Options de configuration : [Auto] [Disabled] [Enabled]
Read Vref Decap Traning (Entraînement de lecture Vref Decap)
Options de configuration : [Auto] [Disabled] [Enabled]
Vddq Training (Entraînement Vddq)
Options de configuration : [Auto] [Disabled] [Enabled]
Duty Cycle Correction Training (Entraînement de correction du cycle de fonctionnement)
Options de configuration : [Auto] [Disabled] [Enabled]
Rank Margin Tool Per Bit (Rank Margin Tool [RMT] par bit)
Options de configuration : [Auto] [Disabled] [Enabled]
DIMM DFE Training (Entraînement DIMM DFE)
Options de configuration : [Auto] [Disabled] [Enabled]