User Manual

ManualsBrandsASUS ManualsComputers & AccessoriesAMD (Ryzen 5000/3000) ATX Content Creator Motherboard (Thunderbolt 4, Dual M.2, PCIe 4.0, Dual 2.5 Gb LAN, DisplayPort/HDMI, USB 3.2 Gen 2 Type-A and Type-C, and RGB headers)

Table Of Contents

1-12

Chapter 1: Product Introduction

Chapter 1

7. SATA6Gb/s connector

The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc

drives and hard disk drives via a SATA cable.

If you installed SATA storage devices, you can create a RAID 0, 1, and 10 configuration

through the onboard AMD B550 chipset.

• These connectors are set to [AHCI] by default. If you intend to create a Serial ATA

RAID set using these connectors, set the SATA Mode Selection item in the BIOS to

[RAID].

• If M.2_2 runs in SATA mode, both PCIEX1_1 and PCIEX1_2 will be disabled.

• Before creating a RAID set, refer to the RAID Configuration Guide. You can

download the RAID Configuration Guide from the ASUS website.