Specifications
2-34
Chapter 2: Getting started
Aggressive LPM Support [Disabled]
This item appears only when you set the previous item to [AHCI] or [RAID] and allows you
to enable or disable PCH entering link power state aggressively. Conguration options:
[Disabled] [Enabled]
S.M.A.R.T. Status Check [On]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Conguration options: [On] [Off]
SATA6G_1~6 (Gray) [Enabled]
These items allow you to enable/disable the SATA ports. Conguration options: [Disabled]
[Enabled]
Hot Plug [Disabled] (SATA6G_1~6 [Gray])
These items appear only when you set the SATA Mode Selection item to [AHCI] or [RAID]
and allow you to enable/disable SATA Hot Plug Support. Conguration options: [Disabled]
[Enabled]
2.6.4 System Agent Configuration
VT-d [Disabled]
Allows you to enable or disable VT-d function on MCH. Conguration options: [Enabled]
[Disabled]
CPU Display Audio [Enabled]
Allows you to enable or disable CPU SA Audio Device. Conguration options: [Enabled]
[Disabled]
DVI Port Audio [Off]
Allows you to enable or disable the DVI port. Conguration options: [On] [Off]
Graphics Configuration
Allows you to select a primary display from CPU Graphics, PCIe and PCI graphical devices.
Primary Display [Auto]
Allows you to select which of the CPU Graphics/PCIE Graphics device should be the
Primary Display. Conguration options: [Auto] [CPU Graphics] [PCIE] [PCI]
DVMT Pre-Allocated for Haswell [Auto]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the
CPU Graphics. Conguration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M]
[224M] [256M] [288M] [320M] [352M] [384M] [416M] [448M] [480M] [512M]
Render Standby [Auto]
Allows you to enable or disable Intel
®
Graphics Render Standby support to reduce
iGPU power use when the system is idle. Conguration options: [Auto] [Disabled]
[Enabled]