User’s Manual

8-12 Chapter 8: Account & General Settings
HTTPS
Set the port for webpage access. Default is 10636.
Remote Desktop port
Set the port for remote desktop. Default is 10637.
Undeploy port
Set the port for removing the agent from clients. Default is 10638.
Agent port:
Configure the ports for the agent and main server to use when connecting to the
client device. Click on
Save
to save the changes made.
We recommend using the default values as this will require no further
adjustments to the client device’s firewall settings.
Account
Set the default administrator account.
Password
Set the default administrator password.
Agent device’s administrator account:
Set the default administrator account and password for client devices if no
administrator account and password were entered when deploying agents. Click
on
Save
to save the changes made.
• If the account type is a domain account, you may enter the account in
the format Domain\Account, which will set the default account used when
deploying to a domain account.
• When using the default account when deploying, make sure of the
language of the client device. The system account with administrator
privileges may differ according to the system language, and may affect
agent deployment to that device.