User’s Manual

5-59ASUS Control Center Express
5.13.1 Adding a trust zone
Up to 8 sets of main server IP address ranges may be added to a client device,
if you already have 8 sets and wish to add more, please remove an existing set
of IP address range from the trust list before adding the new IP address range.
1. Click on
Add
.
5.13 Trust Zone
This item will not be available if your device is not logged into an OS
environment, or is not connected using a management LAN port which
supports RTL 8117 LAN IC.
The Trust Zone provides a method of protecting your client devices from being
accessed by unauthorized or non-trusted connections. This item will allow you to
set main server IP addresses to a client device’s trust zone , and only main server
IP addresses added to the Trust Zone are allowed to perform remote management
control functions on the client device.
If you access the Trust Zone page from
Device Information
you will only be able
to set the Trust Zone of the selected device. To view the Trust Zone of multiple
devices, please navigate back to the main menu page, then select multiple
devices and select
8117-Control
>
8117-Trust Zone
from the
Select Function
drop down menu.