User’s Manual

4-23ASUS Control Center Express
6. Click
OK
on the pop up message, a new pop up message should appear.
7. If you would like to automatically shutdown the client device when the BIOS
update is completed, please click
Yes
on the pop up window. If you would
like to manually shutdown the client device click
No
.
If you selected
Yes
, the device will automatically shutdown after the update
and this action will be reflected in the Mission Center.
If you selected
No
, the device will update the BIOS and the update result
will appear in the Mission Center. Click on the update result in the Mission
Center and click
Shutdown
to manually shutdown the device.
4. (for multiple devices) Select the BIOS you wish to flash on the devices
selected from the drop down menu next to each model name.
5. Select your
Flash Mode
, then click on
Flash BIOS
.
Hardware Flash Mode is only available if the client device is connected using a
management LAN port which supports remote management controller.