User’s Manual

5-144 Chapter 5: Management Functions
Firewall IP Address Rules
This item allows you to configure the firewall IP address rules.
IP Single (or) Range Start
Enter a single IP address or the start of an IP address
range.
IP Range End
(Optional) Enter the end of an IP address range.
Enable Timeout
Enable or disable timeout.
Start Date*
Set the date when the firewall rule comes into effect.
Start Time*
Set the time when the firewall rule comes into effect.
End Date*
Set the date when the firewall rule expires.
End Time*
Set the time when the firewall rule expires.
Rule
Allow or block the specified IP address or range.
Settings marked with an asterisk (*) are only available when the checkbox for
Enable Timeout
is selected.
Firewall IP Address Exist Rules
This item shows existing firewall rules. To remove an existing rule, click the
X
in
the corresponding row.
Video Trigger Settings
This item allows you to configure the events that will trigger the auto video
recording function of the KVM server.
Critical Events
(Temperature/Voltage)
Enable or disable a trigger for the auto video recording
function.
Non-critical Events
(Temperature/Voltage)
Non-recoverable Events
(Temperature/Voltage)
Fan State Changed Events
Watchdog Timer Events
Chassis Power On Events
Chassis Power Off Events
Chassis Reset Events
LPC Reset Events
Date and Time Events
Pre-Event Video Recordings
Enable Pre-Event Video Recordings and set recording
to Pre-Crash or Pre-Reset.