User’s Manual
Table Of Contents
- About this guide
- Chapter 1: Getting Started
- Chapter 2: Main Menu Overview
- Chapter 3: Deploy Management
- 3.1 Agent Management overview
- 3.2 Deploying agents
- 3.2.1 Automatically scanning and deploying to devices
- 3.2.2 Scanning an IP range
- 3.2.3 Adding and deploying to devices
- 3.2.4 Editing device information
- 3.2.5 Installing Agents manually
- 3.2.6 Installing Agents in silent mode
- 3.2.7 Upgrading older versions of agents or repairing agents
- 3.2.8 Setting up a Windows 7 deployment environment
- 3.3 Removing agents
- 3.4 Client Agent Updater
- Chapter 4: Device Information
- Chapter 5: Management Functions
- 5.1 Metadata Management
- 5.2 Software Management
- 5.3 Task Scheduler
- 5.4 OOB Control
- 5.5 Management Control Overview
- 5.6 Management Control Information Overview
- 5.7 DASH Management Control Information
- 5.8 RTL8117 Management Control Information
- 5.9 vPro Management Control Information
- 5.10 BMC Management Control Information
- 5.10.1 Hardware Sensor
- 5.10.2 Inventory
- 5.10.3 Control
- 5.10.4 Remote Desktop
- 5.10.5 Smart BIOS
- 5.10.6 Firmware Update
- 5.10.7 Event Log
- 5.10.8 IPMI
- 5.10.9 IPMI Serial-over-LAN (SOL)
- 5.10.10 Settings
- 5.10.11 Configuration
- 5.10.12 FRU Information
- 5.10.13 Image Redirection
- 5.10.14 Platform Event Filters
- 5.10.14 BSOD Capture
- 5.11 Screen Broadcast
- Chapter 6: Settings Migrator
- Chapter 7: Report Generator
- Chapter 8: Account & General Settings
5-131ASUS Control Center Express
Power
Remotely executes power control functions
Active Users
Shows the currently active users on the server.
Help
Displays additional information on H5Viewer
Browse File
Click this button to add or modify CD media such as
a physical DVD/CD-ROM drive and CD image types
such as
.iso
, then click
Start Media
to start or stop the
redirection.
Start Media
Starts or stops redirection of the media file.
5.10.5 Smart BIOS
This item allows you to update the BIOS of a device by uploading a BIOS file
manually or from the BIOS Cache if the device cannot be powered on to perform a
BIOS update or repair.
The client device will begin updating the BIOS after shutting down. The update
process may take a while, please wait for the update to be finished. Once the
BIOS flash is finished the client device will restart.
DO NOT disconnect the power supply during the BIOS flash.
Flashing BIOS by manually uploading a BIOS file
Manually upload a BIOS file to flash the BIOS of the client device.
1. Select
Manually Upload BIOS File
in the
BIOS
Flash
Type
field.
2. Click on
Browse
to select a BIOS file, then click
OK
to confirm the BIOS file
was uploaded successfully. The uploaded BIOS file will also be added to the
BIOS Cache