User’s Manual

5-47ASUS Control Center Express
Setting the account and password through Management Control
Information of a single device
You can set the remote management controller log in account for ASUS Control
Center Express for a single client device through the Management Control
Information page.
If a client device(s) with a remote management controller already has an agent
deployed to it, you can also select the client device(s) from the devices list
on the main menu page, then click on
Select Function
>
OOB - Control
>
Account Management
>
Set password
for RTL8117 and vPro, or click on
Select Function
>
OOB - Control
>
Account Management
>
Login
for BMC
and DASH.
1. To enter the Management Control Information page you can either
• On the main menu page, click on in the M.C. column of the device
you would like to enter the
Management Control Information
of.
To use this method, the client device should already have an agent deployed to
it.
• Click on then perform a
Scan
or
Scan IP Range
, then click on
in the M.C column of the device you would like to enter the Management
Control Information of.
• Enter the
Device Information
page of a device, then toggle the
Mode
to
Hardware
.
2. If the login account and password ASUS Control Center Express is using to
log into the client device’s remote management controller do not match, a
pop-up message should show up: