User’s Manual

5-42 Chapter 5: Management Functions
•
To set up a DASH controller, enter the account and password for the
client device’s remote management controller under
DASH Account
.
You may choose to enter the port used for DASH, or enable/disable the
TLS (Transport Layer Security). Click
Save
when you are finished.
• The account and password for
DASH Account
is limited to 15 characters.
• The account and password entered should match the account and
password already set on the client device.
•
To set up a BMC controller, enter the account and password for the
client device’s remote management controller under
BMC Account
.
You may choose to enter the port used for BMC. Click
Save
when you
are finished.
• The account for
BMC Account
must start with a letter (A-z), must contain
at least one number (0-9), and is limited to 16 characters. The password
must be at least 8 characters long.
• The account and password entered should match the account and
password already set on the client device.
2. After setting up the BMC Account,
vPro Account
, and/or
DASH Account
information, ASUS Control Center Express will automatically log into the
client device’s remote management controller. You can perform a scan in the
Management Controller page to check the remote management controller
login status for the client device(s).
If the default login account and password matches the client device’s remote
management controller match, the login status will be displayed as
Login
successful
on the Management Controller page after executing a scan.
The default account and password entered can be used to log into multiple
client devices which have the same remote management controller account
and password.