User’s Manual
Table Of Contents
- About this guide
- Chapter 1: Getting Started
- Chapter 2: Main Menu Overview
- Chapter 3: Deploy Management
- 3.1 Agent Management overview
- 3.2 Deploying agents
- 3.2.1 Automatically scanning and deploying to devices
- 3.2.2 Scanning an IP range
- 3.2.3 Adding and deploying to devices
- 3.2.4 Editing device information
- 3.2.5 Installing Agents manually
- 3.2.6 Installing Agents in silent mode
- 3.2.7 Upgrading older versions of agents or repairing agents
- 3.2.8 Setting up a Windows 7 deployment environment
- 3.3 Removing agents
- 3.4 Client Agent Updater
- Chapter 4: Device Information
- Chapter 5: Management Functions
- 5.1 Metadata Management
- 5.2 Software Management
- 5.3 Task Scheduler
- 5.4 OOB Control
- 5.5 Management Control Overview
- 5.6 Management Control Information Overview
- 5.7 DASH Management Control Information
- 5.8 RTL8117 Management Control Information
- 5.9 vPro Management Control Information
- 5.10 BMC Management Control Information
- 5.10.1 Hardware Sensor
- 5.10.2 Inventory
- 5.10.3 Control
- 5.10.4 Remote Desktop
- 5.10.5 Smart BIOS
- 5.10.6 Firmware Update
- 5.10.7 Event Log
- 5.10.8 IPMI
- 5.10.9 IPMI Serial-over-LAN (SOL)
- 5.10.10 Settings
- 5.10.11 Configuration
- 5.10.12 FRU Information
- 5.10.13 Image Redirection
- 5.10.14 Platform Event Filters
- 5.10.14 BSOD Capture
- 5.11 Screen Broadcast
- Chapter 6: Settings Migrator
- Chapter 7: Report Generator
- Chapter 8: Account & General Settings
4-33ASUS Control Center Express
4. Select a model from the drop down menu, then check the client device you
wish to download drivers or applications for (the client device is checked by
default).
5. Select the drivers, utility applications or BIOS you would like to download
and install, then click on
Download & install
.
• Scroll down on the driver / utility application / BIOS block to view and select
the rest of the items available. The items displayed may vary between
device model.
• The
Driver
,
Utility
, and
BIOS
blocks will display items already installed, as
well as recommended available updates.
• Drivers and utility applications marked
Yes
in the
Manual installation is
required
column require a manual installation on the client device (the
installation files can be found in the download path you selected on the
client device).
• You can click on
Check all items
to select all the driver, utility applications,
and BIOS files available, or click on
Uncheck all items
to deselect all the
driver, utility applications, and BIOS files available.
• The downloaded drivers utility applications, or BIOS files will be
downloaded to the ASUS Control Center Express main server.
BIOS files can only be downloaded, to update the BIOS, please click on
BIOS Flash Management, then upload the BIOS file to the BIOS cache and
update the BIOS. For more information please refer to
4.10.1 BIOS Flash
Management
.