User’s Manual

2-12 Chapter 2: Main Menu Overview
OOB-Control*
Master Bus Reset
Graceful
Normal shut down and resetting the
hardware of the selected device(s)
through the remote management
controller.
Power Cycle
(Graceful Soft
Off) (G2/S5)
Normal shut down via the OS then
restarting the selected device(s)
through the remote management
controller.
Power Cycle
(Graceful Hard
Off) (G3)
Normal shut down via the hardware
then restarting the selected
device(s) through the remote
management controller.
Watchdog
WatchDog Enable
Enable RTL8117 WatchDog
monitoring for selected device(s).
WatchDog
Disable
Disable RTL8117 WatchDog
monitoring for selected device(s).
BIOS
Clear CMOS
Clear CMOS for selected device(s)
through RTL8117 to reset them to
factory settings.
Account
Management
Set password
Setting the remote management
controller account password for
selected RTL8117 or vPro device(s).
Login (DASH)
Logging into the remote
management controller account of
selected DASH device(s).
System
Restart service
Restart the RTL8117 service on
selected device(s).
KVM
KVM Remote
Multi-display
Setting RTL8117 KVM of selected
device(s) as remote Multi-display.
KVM Local Multi-
display
Setting RTL8117 KVM of selected
device(s) as local Multi-display.
KVM Remote
Single-display
Setting RTL8117 KVM of selected
device(s) as remote single-display.
KVM Enable
Enable KVM for selected RTL8117
and vPro machine(s).
KVM Disable
Disable KVM for selected vPro
machine(s).
KVM Password
Setting the vPro KVM password for
selected device(s).
(continued on the next page)