User’s Manual

2-10 Chapter 2: Main Menu Overview
2.2.6 Using shortcut functions
You can perform certain actions or schedule tasks for the client devices.
1. Select the device(s) you would like to perform an action on.
2. Click on
Select function
, and select the function you would like to use.
Please refer to the table below for a brief summary of each function.
•
OOB-Control
functions are only available on client devices connected
using a management LAN port which supports remote management
controller.
• Some functions may require you to restart the client device for the changes
to take effect.
(continued on the next page)
Remote Control
Restart Computer
Restart the selected device(s).
Power Off
Power off the selected device(s).
Power On
Power on the selected device(s).
A powered off client
device can only
be powered on if it
supports Wake on
LAN.
OOB-Control*
Power
Control
Power On
(G0/S0)
Power on the selected device(s)
through the remote management
controller.
Power Off - Soft
(G2/S5)
Power off the selected device(s)
through the remote management
controller.
Power Off - Hard
(G3)
Force a power off of the selected
device(s) through the remote
management controller.
Power Cycle -
Soft off (G2/S5)
Setting the selected device(s) to
restart after shutting down the OS
through the remote management
controller.
Sleep - Deep (G1/
S3)
Setting the selected device(s) to
enter sleep mode (G1/S3) through
the remote management controller.
Master Bus Reset
Resetting the hardware of the
selected device(s) through the
remote management controller.