User’s Manual
Table Of Contents
- About this guide
- Chapter 1: Getting Started
- Chapter 2: Main Menu Overview
- Chapter 3: Deploy Management
- 3.1 Agent Management overview
- 3.2 Deploying agents
- 3.2.1 Automatically scanning and deploying to devices
- 3.2.2 Scanning an IP range
- 3.2.3 Adding and deploying to devices
- 3.2.4 Editing device information
- 3.2.5 Installing Agents manually
- 3.2.6 Installing Agents in silent mode
- 3.2.7 Upgrading older versions of agents or repairing agents
- 3.2.8 Setting up Windows 7 deployment environment
- 3.3 Removing agents
- 3.4 Client Agent Updater
- Chapter 4: Device Information
- Chapter 5: Management Functions
- Chapter 6: Settings Migrator
- Chapter 7: Report Generator
- Chapter 8: Account & General Settings
5-80 Chapter 5: Management Functions
4. Select if you wish to perform a
Normal Mode
BIOS flash or if you wish to do
a
Recovery Mode
BIOS flash, then click
OK
.
Performing a
Recovery Mode
BIOS Flash will reset all BIOS configurations,
and remove all previous configurations.
Flashing BIOS from the BIOS cache
You can select a BIOS file from the BIOS cache.
1. Select
Flash from BIOS Cache
in the
BIOS
Flash
Type
field.
2. Select a BIOS file from the
BIOS Cache List
drop down menu.
3. Click on
Flash BIOS
.
Flash Mode
will be defaulted to
Hardware Mode
.