User’s Manual
Table Of Contents
- About this guide
- Chapter 1: Getting Started
- Chapter 2: Main Menu Overview
- Chapter 3: Deploy Management
- 3.1 Agent Management overview
- 3.2 Deploying agents
- 3.2.1 Automatically scanning and deploying to devices
- 3.2.2 Scanning an IP range
- 3.2.3 Adding and deploying to devices
- 3.2.4 Editing device information
- 3.2.5 Installing Agents manually
- 3.2.6 Installing Agents in silent mode
- 3.2.7 Upgrading older versions of agents or repairing agents
- 3.2.8 Setting up Windows 7 deployment environment
- 3.3 Removing agents
- 3.4 Client Agent Updater
- Chapter 4: Device Information
- Chapter 5: Management Functions
- Chapter 6: Settings Migrator
- Chapter 7: Report Generator
- Chapter 8: Account & General Settings
5-43ASUS Control Center Express
2. After the scan is completed, you can check if ASUS Control Center Express
has successfully logged into the client device’s remote management
controller. If the account and password entered in ASUS Control Center
Express does not match the client device’s remote management controller
account and password,
Login failed
will be displayed in the
Login Status
column.
3. Select the client devices for which you would like to set the account and
password ASUS Control Center Express will use to log into the client
device’s remote management controller.
When selecting multiple client devices to set the account and password, ensure
to select client devices with the same remote management controller.
4. Depending on the remote management controller type, the steps for setting
the account and password may differ slightly.
For RTL8117 and vPro
a. Click on
Select Function
>
Account Management
>
Set password
.
b. Enter the account and password ASUS Control Center will use to log
into the client device’s remote management controller, then click
Save
.