User’s Manual

5-42 Chapter 5: Management Functions
3. Under
DASH Account
, enter the account and password for the client
device’s remote management controller. You may choose to enter the port
for DASH, or enable/disable the TLS (Transport Layer Security). Click
Save
when you are finished.
• The account and password for
DASH Account
is limited to 15 characters.
• The account and password entered should match the account and
password already set on the client device.
4. After setting up the
vPro Account
and
DASH Account
information, ASUS
Control Center Express will automatically log into the client device’s remote
management controller. You can perform a scan in the Management
Controller page to check the remote management controller login status for
the client device(s).
If the default login account and password matches the client device’s remote
management controller match, the login status will be displayed as
Login
successful
on the Management Controller page after executing a scan.
Setting the account and password through Management Controller
You can set the remote management controller log in account for ASUS Control
Center Express for multiple client devices through the Management Controller
page.
If a client device(s) with a remote management controller already has an agent
deployed to it, you can also select the client device(s) from the devices list
on the main menu page, then click on
Select Function
>
OOB - Control
>
Account Management
>
Set password
for RTL8117 and vPro, or click on
Select Function
>
OOB - Control
>
Account Management
>
Login (DASH)
for DASH.
1. Click on then perform a
Scan
or
Scan IP Range
.
The default account and password entered can be used to log into multiple
client devices which have the same remote management controller account
and password.