User’s Manual
Table Of Contents
- About this guide
- Chapter 1: Getting Started
- Chapter 2: Main Menu Overview
- Chapter 3: Deploy Management
- 3.1 Agent Management overview
- 3.2 Deploying agents
- 3.2.1 Automatically scanning and deploying to devices
- 3.2.2 Scanning an IP range
- 3.2.3 Adding and deploying to devices
- 3.2.4 Editing device information
- 3.2.5 Installing Agents manually
- 3.2.6 Installing Agents in silent mode
- 3.2.7 Upgrading older versions of agents or repairing agents
- 3.2.8 Setting up Windows 7 deployment environment
- 3.3 Removing agents
- 3.4 Client Agent Updater
- Chapter 4: Device Information
- Chapter 5: Management Functions
- Chapter 6: Settings Migrator
- Chapter 7: Report Generator
- Chapter 8: Account & General Settings
4-28 Chapter 4: Device Information
4.11 Installer
Ensure the main server is connected to the Internet and has a stable
connection.
This item will allow you to download and update the driver, utility application, and
BIOS for a single or multiple devices.
If you access the Installer page from
Device Information
you will only be able
to download and update the driver, utility application, and BIOS of the selected
device. To download and update the driver, utility application, and BIOS of multiple
devices, please navigate back to the main menu page, then select multiple
devices and select
Software Management
>
Installer
from the
Select Function
drop down menu.
• When selecting multiple devices, ensure that most devices selected are
online (some devices may be offline), as the download and install process
is only applied to online devices. If all devices selected are offline, you will
be prompted with a message asking you to select online devices.
• Only single devices will display the versions of drivers, utility applications,
and BIOS already installed.
• Only single devices will automatically check recommended drivers and
utility applications for downloading and installation if the driver and utility
application version is outdated or has not been installed.