User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
3-66
Chapter 3: Web-based User Interface
3.10 Power Control
The Power Control displays the current server power status and allows you to change the
current settings. Select the desired option, and then click
Perform Action
to execute the
selected action.
Power Off
Immediately power off the remote device.
Power On
Power on the remote device.
Power Cycle
Turn off the power then reboot the remote device (cold
boot).
Hard Reset
Reboot the system without powering off (warm boot).
ACPI Shutdown
Initiate operating system shutdown prior to the shutdown.
To use the power on/off and reset function, ensure the
PANEL header
is connected to the
motherboard and the chassis panel.