User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
3-56
Chapter 3: Web-based User Interface
Auto Video Settings
This page allows you to configure the events that will trigger the auto video recording function
of the KVM server and display the list of available recorded video files on the BMC.
3.7.15 Video Recording
This page allows you to customize the video recording settings.
• Video Trigger Settings
This page allows you to configure the video recording triggers.
Critical Events
(Temperature/Voltage)
You can check/uncheck a box on the Event List to
add/remove that trigger for your system.
KVM service should be enabled to perform
auto-video recording. The date and time
event should be in advance of the current
system date and time.
Non Critical Events
(Temperature/Voltage)
Non Recoverable Events
(Temperature/Voltage)
Fan state changed Events
Watchdog Timer Events
Chassis Power On Events
Chassis Power Off Events
Chassis Reset Events
LPC Reset Events
Date and Time Event
Pre-Event Video Recording
Pre-Event Video Recording information.
• Video Remote Storage
This page allows you to configure video remote storage settings.
Record Video to Remote
Server
Enable or disable Remote Video support.
By default, video files will be stored in the
local path of the BMC. If remote video
support is enabled, then the video files will
be stored only to the remote path, and not
within the BMC.
Maximum Dumps
The maximum dumps value should range from 1
to 100.
This item is only configurable if
Record
Video to Remote Server
is enabled.
(continued on the next page)