User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
ASUS IPMI Expansion Card
3-49
Upload SSL Certificate
This page allows you to upload a certificates and private keys.
Current Certificate
Contains information of the Current Certificate. The date and
time it was uploaded will also be displayed (read only).
New Certificate
Click the Browse button and navigate to the new certificate file.
Certificate file should be of pem type.
Current Private Key
Contains information for the current private key. The date and
time it was uploaded will also be displayed (read only).
New Private Key
Click the Browse button and navigate to the private key file.
Private Key file should be of pem type.
3.7.13 System Firewall
This page allows you to create and manage firewalls on the BMC, IP address, and port firewall
rule management.
General Firewall Settings
This page allows you to create and manage existing general firewall settings.
• Existing Firewall Settings
This page displays the list of general firewall rules on this BMC.
• To view the page, the user must at least have Operator privileges.
• To add or delete a firewall, the user must have Administrator privileges.
• To ensure the date and time of the firewall rule works properly, make sure to set the
BMC system time before setting the firewall.
• Click on the
x
icon to delete a firewall rule from the list.
• Add Firewall Settings
This page allows you to add firewall settings.
Block All
Blocks all incoming IPv4, IPv6, and Ports.
Flush All
Clear all existing system firewall rules.
Timeout
Enable or disable firewall rules with timeout.
(continued on the next page)