User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
ASUS IPMI Expansion Card
3-41
Service Configuration
This page allows you to configure the selected service.
Service Name
Displays the service name of the selected slot (read
only).
Active
Displays the current status of the service, either active
or inactive. Check to activate the service.
Interface Name
This indicates the interface on which the service is
running. The user can choose any one of the available
interfaces.
• Service mapping to disabled interfaces
will not work. Status of interface can be
checked/enabled, under
Configuration
>
Network
>
LAN Settings
.
• Media and KVM interfaces are read only
when single port is enabled.
• This item is only configurable if
Active
is
enabled.
Secure Port
Used to configure secure port numbers for the services.
• Web default port is 443.
• KVM default port is 443.
• CD Media default port is 443.
• HD Media default port is 443.
• SSH default port is 22.
• Port value ranges from 1 to 65535.
• Port 80 is blocked for TCP/UDP protocols.
• This item is only configurable if
Active
is
enabled.
(continued on the next page)