User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
3-38
Chapter 3: Web-based User Interface
LAN Destinations
This page shows all configured LAN destinations and available slots. You can modify or add
new LAN destination entry from on this page. A maximum of 15 slots are available.
• LAN Destination Configuration
Clicking on a Configured or UnConfigured slot will allow you to edit a LAN
destination, or add a new LAN destination.
LAN Channel
Displays the LAN Channel Number of the selected
slot (read only).
LAN Destination
Displays the Destination number of the selected
slot (read only).
Destination Type
Select between SMNP Trap or E-Mail as the
destination type.
SMNP Trap Versions
Select an SMNP Trap Version
This item is only configurable if
Destination Type
is set to
SNMP Trap
.
(continued on the next page)
Event Specific Alert String
Check this item to specify an event-specific Alert
String.
Alert String Key
Select from a set of values (all linked to strings
that are kept in the PEF configuration parameters),
to specify which is to be sent for this Alert Policy
entry.
- Send Test Alert: Select a configured slot and click Send Test Alert to generate a sample alert
message to the configured destination.
• Test alert for emails can only be sent when SMTP configuration is enabled. To set
SMTP configuration, go to
Settings
>
SMTP
. Make sure that SMTP server address
and port numbers are configured properly.
• After a LAN destination has been configured, an
x
icon will appear to the top right of
the LAN Channel slot. Click on the
x
icon to delete the LAN Channel slot from the list.