User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
ASUS IPMI Expansion Card
3-35
Alert Policy Group Number
Select a configured alert policy number from the
dropdown list.
Alert Policy can be configured under
Configuration
>
PEF
>
Alert
Policy
.
Raw Data
Enable this option to enter the Generator ID with
raw data.
Generator ID 1
Enter the raw generator ID1 data value.
This item is only configurable if
Raw Data
is enabled.
Generator ID 2
Enter the raw generator ID2 data value.
• In the RAW data field, prefix the value
with ‘0x’ to specify hexidecimal value.
• This item is only configurable if
Raw
Data
is enabled.
Generator Type
Select the event generator as Slave Address - if
event is generated from IPMB, or software.
This item is only configurable if
Raw Data
is disabled.
Slave Address/Software ID
Select the System Software ID - if event is
generated from system software.
This item is only configurable if
Raw Data
is disabled.
Channel Number
Select the particular channel number through
which the event message is received over. Select
‘0’ if the event message is received via the system
interface, primary IPMB, or internally generated by
the BMC.
This item is only configurable if
Raw Data
is disabled.
IPMB Device LUN
Select the corresponding IPMB Device if event is
generated by IPMB.
This item is only configurable if
Raw Data
is disabled.
Sensor type
Select the type of sensor that will trigger the event
filter action.
Sensor name
Select the particular sensor from the sensor list.
(continued on the next page)