User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
ASUS IPMI Expansion Card
3-33
3.7.8 PAM Order Settings
This page allows you to configure the PAM order for user authentication into the BMC. The
list of PAM modules supported in the BMC is displayed, and you can drag and drop the PAM
modules to reorganize their positions in the sequence.
BMC
Registration
Settings: BMC
Interface
IP Priority
Select the IP Priority.
• If IP priority is IPv4, then 2 IPv4 and 1 IPv6
DNS servers can be used.
• If IP priority is IPv6, then 1 IPv4 and 2 IPv6
DNS servers can be used.
• This item is only configurable if
Domain
Setting
is set to
Automatic
.
DNS Server
1-3
Specify the DNS (Domain Name System) server
address to be configured for the BMC.
• IPv4 Addresses should be given dotted
decimal representation.
• IPv6 Addresses are supported and must be
global unicast addresses.
• These items are only configurable if
Domain
Setting
is set to
Manual
.