User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
ASUS IPMI Expansion Card
3-23
• Role Groups
Allows you to set Active Directory user role groups.
- Clicking on an unassigned empty box will allow you to add a new role group.
- Clicking on a cell with an existing role group will allow you to modify the role
group.
- Clicking on the
x
to the top right corner of a role group will delete the role
group.
RADIUS Settings
This page is used to enable or disable RADIUS authentication and enter the required
information to access the RADIUS server.
• General RADIUS Settings
Enable RADIUS
Authentication
Enable or disable RADIUS Authentication.
Server Address
Enter RADIUS server address.
IPV4 and IPV6 address formats, and
FQDN (Fully Qualified Domain Name)
format is supported.
Port
Set RADIUS port.
• Default port is 1812.
• Port value ranges from 1 - 65535.
• Port 80 is blocked for TCP/UDP
protocols.
Secret
Set RADIUS server password.
• Must be at least 4 characters long.
• White space is not allowed.
• Must not exceed 32 characters.
• Advanced RADIUS Settings
For authorization purposes, when setting the items in the Advanced RADIUS
Settings page, you should use Vendor Specific Attributes for the radius users on
the server.
• Do not exceed 127 characters for each field.
• The ‘
#
’ character is not allowed.