User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
2-10
Chapter 2: Hardware Information
Configure IPV6 support
Lan channel 1
IPV6 support
Allows you to enable or disable IPV6 support.
Configuration options: [Enabled] [Disabled]
The following items appear only when
IPV6 support
is set to
[Enabled]
.
Configuration Address source
Allows you to set the LAN channel parameters statically or dynamically (by BIOS or by
BMC).
[Unspecified]
option will not modify any BMC network parameters during BIOS
phase.
Configuration options: [Unspecified] [Static] [DynamicBmcDhcp]
The following items are available only when
Configuration Address source
is
set to
[Static]
.
Station IPV6 address
Allows you to set the station IPV6 address.
Prefix Length
Allows you to set the prefix length (maximum of Prefix Length is 128).
Configuration Router Lan1 Address source
Allows you to set the LAN channel parameters statically or dynamically (by BIOS or by
BMC).
[Unspecified]
option will not modify any BMC network parameters during BIOS
phase.
Configuration options: [Unspecified] [Static] [DynamicBmcDhcp]
The following items are available only when
Configuration Router Lan1
Address source
is set to
[Static]
.
IPV6 Router1 IP Address
Allows you to set the IPV6 Router1 IP address.
IPV6 Router1 Prefix Length
Allows you to set the IPV6 router prefix length (maximum of IPV6 Router Prefix Length
is 128).
IPV6 Router1 Prefix Value
Allows you to change the IPV6 router prefix value.