User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
ASUS IPMI Expansion Card
3-73
BIOS OOB Update
This page allows you to view the BIOS information and perform a BIOS OOB update.
To update the BIOS OOB, please follow the steps below:
1. Click on Browse, then select the BIOS image file (.cap) you wish to use for the update.
BIOS firmware only supports .cap files.
2. Click on Upload BIOS file to activate local media and mount the BIOS file into the
virtual storage after a reset.
3. After the file has been successfully uploaded, click on Power Reset in the Quick
Control block.
4. After resetting, the host will detect that a BIOS update is available and search the virtual
storage for the BIOS file and perform the BIOS update.
BIOS Information
Displays the current BIOS information (BIOS MB Model,
BIOS Version, BIOS Build Time) for the remote device.
BIOS OOB Update
Select the BIOS image file you wish to use for the
update, then click Upload BIOS file and perform the
BIOS OOB update.
Quick Control
Power On/Off
Perform the quick control command selected.
Power Reset
Locate On/Off