User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Installation Information
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Date & Time
- 3.7.2 External User Services
- 3.7.3 KVM Mouse Setting
- 3.7.4 Log Settings
- 3.7.5 Manage Licenses
- 3.7.6 Media Redirection Settings
- 3.7.7 Network Settings
- 3.7.8 PAM Order Settings
- 3.7.9 Platform Event Filters
- 3.7.10 Services
- 3.7.11 SMTP Settings
- 3.7.12 SSL Settings
- 3.7.13 System Firewall
- 3.7.14 User Management
- 3.7.15 Video Recording
- 3.7.16 Fan Control
- 3.7.17 PSU Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
ASUS IPMI Expansion Card
3-69
Firmware Image Location
This page allows you to select the protocol (
Web Upload during flash
,
TFTP Server
) to be
used to transfer the firmware image onto the BMC.
Firmware Information
This page displays the Build Date, Build Time, and Firmware Version of the active BMC
image.
Build Date
Displays the build date of the active BMC image.
Build Time
Displays the build time of the active BMC image.
Firmware version
Displays the firmware version of the active BMC image.
Firmware Update
This page allows you to update the firmware of the device remotely.
To update the firmware, please follow the steps below:
1. Browse and select the firmware image file (.ima) you wish to use to update the firmware.
2. Click on Start firmware update.