User Manual

Pro WS W680-ACE BIOS 用戶手冊
23
EARLY DIMM DFE Training
設置值有：[Auto] [Disabled] [Enabled]
Tx Dqs Dcc Training
設置值有：[Auto] [Disabled] [Enabled]
DRAM DCA Training
設置值有：[Auto] [Disabled] [Enabled]
Write Driver Strength Training
設置值有：[Auto] [Disabled] [Enabled]
Rank Margin Tool
設置值有：[Auto] [Disabled] [Enabled]
Memory Test
設置值有：[Auto] [Disabled] [Enabled]
DIMM SPD Alias Test
設置值有：[Auto] [Disabled] [Enabled]
Receive Enable Centering 1D
設置值有：[Auto] [Disabled] [Enabled]
Retrain Margin Check
設置值有：[Auto] [Disabled] [Enabled]
Write Drive Strength Up/Dn independently
設置值有：[Auto] [Disabled] [Enabled]
Margin Check Limit
本項目可以檢視啟動內存是否需要重設。
設置值有：[Disabled] [L1] [L2] [Both]
以下項目只有在 Margin Check Limit 設為 [L2] 或 [Both] 時才會出現。
Margin Limit Check L2
設置值有：[1] - [300]
Third Timings
tRDRD_sg_Training
設置值有：[Auto] [0] - [127]
tRDRD_sg_Runtime
設置值有：[Auto] [0] - [127]
tRDRD_dg_Training
設置值有：[Auto] [0] - [127]
tRDRD_dg_Runtime
設置值有：[Auto] [0] - [127]
tRDWR_sg
設置值有：[Auto] [0] - [255]
tRDWR_dg
設置值有：[Auto] [0] - [255]