User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
80
Pro WS W680-ACE Series BIOS Manual
Configure IPV6 support
LAN channel 1
IPV6 support
Allows you to enable or disable IPV6 support.
Configuration options: [Enabled] [Disabled]
The following items appear only when IPV6 support is set to [Enabled].
Configuration Address source
Allows you to set the LAN channel parameters statically or dynamically (by BIOS or by
BMC). [Unspecified] option will not modify any BMC network parameters during BIOS
phase.
Configuration options: [Unspecified] [Static] [DynamicBmcDhcp]
The following items are available only when Configuration Address source is set to
[Static].
Station IPV6 address
Allows you to set the station IPV6 address.
Prefix Length
Allows you to set the prefix length (maximum of Prefix Length is 128).
Configuration Router Lan1 Address source
Allows you to set the LAN channel parameters statically or dynamically (by BIOS or
by BMC). [Unspecified] option will not modify any BMC network parameters during
BIOS phase.
Configuration options: [Unspecified] [Static] [DynamicBmcDhcp]
The following items are available only when Configuration Router Lan1 Address source
is set to [Static].
IPV6 Router1 IP address
Allows you to set the IPV6 Router1 IP address.
IPV6 Router1 Prefix Length Lan1
Allows you to set the IPV6 Router1 prefix length (maximum of Prefix Length is 128).
IPV6 Router1 Prefix Value Lan1
Allows you to set the IPV6 Router1 prefix value.