User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
Pro WS W680-ACE Series BIOS Manual
77
11. IPMI menu
The IPMI menu items allow you to configure IPMI settings.
OS Watchdog Timer
When this option is set to [Enabled] it starts a BIOS timer which can only be shut off by
Management Software after the OS loads. Helps determine if the OS successfully loaded or
follows the OS Boot Watchdog Timer policy.
Configuration options: [Enabled] [Disabled]
The following items appear only when OS Watchdog Timer is set to [Enabled].
OS Wtd Timer Timeout
Enter a value between 1 and 30 min for OS Boot Watchdog Expiration, Not available if OS
Boot Watchdog Timer is disabled.
Configuration options: [1] - [30]
OS Wtd Timer Policy
This item allows you to configure the how the system should respond if the OS Boot Watch
Timer expires.
Configuration options: [Do Nothing] [Reset] [Power Down] [Power Cycle]
MLED light Synchronizing
Allows you to synchronize the message LED light with the left RJ45 LED of the IPMI
Expansion card.
Configuration options: [Disabled] [Enabled]